Skip to content 
How To Remove Blink Camera From Mount
Keeping your home or office safe sometimes means having Blink cameras around.
But hey, there might come a time when you need to move or unhook your Blink camera for a fix, a shift, or just because. In those moments, knowing the easy and right way on how to remove blink camera from mount is pretty important.
This guide is here to help you out with simple steps and friendly tips for a smooth ride in removing your Blink camera.
Grabbing Your Tools
Before you start the whole Blink camera takedown party, make sure you’ve got your tools ready. It makes everything way easier. Here’s the checklist:
1. Screwdriver: Find one that fits those screws on the mount snugly.
2. Ladder or Step Stool: If your Blink camera is up high, grab a ladder or step stool to reach it safely.
3. Safety Gloves: Pop on those safety gloves – just a good habit when dealing with tools.
Now, you’re all set to bid farewell to your Blink camera from its mount. Safety first, though!
Step 1: Turning Off the Camera
First things first – let’s switch off that camera. Here’s the easy plan:
1. Look for the power button on the camera – usually on the top or side.
2. Hold that power button down for a few seconds until the camera takes a little nap. If you’re unsure, peek into the camera’s user manual for help.
Now that the camera’s in snooze mode, you’re ready to gently remove it from the mount without any unexpected surprises.
Step 2: Saying Goodbye to the Mount
Taking the camera off its mount is no biggie. Just follow these chill steps:
1. Spot your camera on the mount and check for any screws or clips holding it tight.
2. Unplug that power source to play it safe.
3. If there are any screws or clips, use your trusty screwdriver to set them free.
4. Give your camera a gentle pull away from the mount – no need to rush. Make sure it’s all cool and separated.
Quick check: Ensure both the camera and the mount are A-OK, and the camera is totally off the hook.
With these steps, you’ve safely bid adieu to your Blink camera from the mount. Nice job!
Step 3: Unplugging the Cables
To fully release your Blink camera, it’s time to disconnect the cables the right way. Here’s the deal:
1. Unplug that power adapter from the camera – easy-peasy once it’s powered off.
2. If there are more cables hanging around, like the ones connected to a sync module, give them a gentle tug.
By following these steps, you’ve gracefully untangled your Blink camera from its cable connections, paving the way for the final goodbyes.
Step 4: Removing the Mounting Bracket
After parting ways with your Blink camera, the last dance is removing the mounting bracket. Here’s your guide:
1. Spot the small screw at the bottom of the mounting bracket.
2. Grab your screwdriver and give it a good ol’ counterclockwise spin.
3. Once the screw is loose, set it free from the bracket.
4. Slide that bracket up or down gently – be nice to it!
5. Be cautious not to mess up the mounting surface while you gently pull the bracket away.
Handle that bracket with care, and there you have it – your Blink camera is officially off the grid.
Troubleshooting Common Issues
If you run into any speed bumps along the way, here are some friendly troubleshooting tips:
1. If the camera is feeling clingy, press the release button firmly while giving it a little pull. Check for anything in the way.
2. If the mount seems stubborn, a little wiggle of the camera while pressing the release button might help.
3. For shaky connections, make sure your camera is hanging out near your Wi-Fi network. Maybe move it a bit closer or use a Wi-Fi booster.
4. If the camera’s having a snooze after the goodbye, check the battery and maybe give it a reset.
5. App acting up? Check your internet, restart the app, or give it a fresh reinstall.
These friendly troubleshooting tips should help you breeze through any bumps in the Blink camera separation journey. And if things get tricky, peek into the Blink user manual or chat up customer support for some extra help. You got this!
If your blink camera is flashing red; you can visit this article to configure your problem Blink Camera Flashing Red 6 Times – Causes & Solution – (smartvisliving.com)
Conclusion
Removing your Blink camera from the mount is a simple task when done correctly. By following these steps and troubleshooting tips, you ensure a smooth and safe process.
Now you can confidently relocate or maintain your Blink camera as needed.
Remember, this process is more than just a technical maneuver; it’s a gateway to flexibility in securing your surroundings.
Whether you’re relocating your camera for enhanced coverage or conducting routine maintenance, the proper removal and reinstallation techniques contribute to the overall effectiveness of your Blink camera.
Blink Customer Support
If you find yourself in need of assistance or have questions regarding your Blink camera, reaching out to Blink customer support is a wise step.
The customer support team is dedicated to providing helpful and timely solutions to ensure your experience with Blink products is seamless.
Visit the official Blink website and navigate to the “Support” or “Contact Us” section.
Look for helpful articles, FAQs, and troubleshooting guides that might address your query.
Whether you’re facing technical challenges, have questions about product features, or need guidance on installation, Blink customer support is your go-to resource for assistance.
FAQs
1- Can I reuse the mounting bracket?
Yes, you can reuse the mounting bracket for future installations.
2- How often should I remove and reinstall my Blink camera?
It depends on your specific needs. Regular maintenance or relocation may require occasional removal.
3-What do I do if the camera won’t detach?
Press the release button firmly while pulling the camera away. Check for any obstructions.
4- Is it safe to remove the camera without powering it off?
It’s recommended to power off the camera before removal to ensure safety and prevent damage.
5- Can I reinstall the camera on a different mount?
Yes, you can reinstall the camera on a different mount following the same process.
